Haltech Platinum Sprint RE pinout
ecurecovery.com/pinouts/haltech/platinum-sprint-re · Every pin checked against 2 Haltech documents · data checked 2026-11-01
Haltech Platinum Sprint RE pinout
Every pin of the 32-pin connector, with the wire colours of Haltech's harness. Tap a pin to see what it does.
Every pin checked against 2 Haltech documentsPick any pin on the drawing or in the table to see its function, its wire colour and the documents it was checked in.
Haltech Platinum Sprint RE 32-pin connector pinout
| Pin | Function | Wire |
|---|---|---|
| 1 | TRIGGER (+) | YYellow |
| 2 | HOME (+) | YYellow |
| 3 | Not used | - |
| 4 | ROADSPEED INPUT (DPI1) | GYGreyShielded |
| 5 | Not used | - |
| 6 | TACHO OUTPUT (DPO1) | V/BViolet with black stripe |
| 7 | THERMOFAN OUTPUT (DPO2) | V/BRViolet with brown stripe |
| 8 | GENERAL PURPOSE OUTPUT 1 (DPO3) | V/RViolet with red stripe |
| 9 | GENERAL PURPOSE OUTPUT 2 (DPO4) | V/OViolet with orange stripe |
| 10 | +12V SWITCHED | GY/RGrey with red stripe |
| 11 | +12V SWITCHED | RRed |
| 12 | FUEL PUMP RELAY TRIGGER | B/YBlack with yellow stripe |
| 13 | INJECTOR # 4 | L/RBlue with red stripe |
| 14 | INJECTOR # 3 | L/BRBlue with brown stripe |
| 15 | INJECTOR # 2 | L/BBlue with black stripe |
| 16 | INJECTOR # 1 | LBlue |
| 17 | TRIGGER (-) | GGreen |
| 18 | HOME (-) | GGreen |
| 19 | Not used | - |
| 20 | AUX REV LIMITER (AVI1) | O/BOrange with black stripe |
| 21 | O2 SENSOR INPUT | GY/OGrey with orange stripeShielded |
| 22 | SIGNAL GROUND | B/WBlack with white stripe |
| 23 | POWER GROUND | BBlack |
| 24 | COOLANT TEMPERATURE (ATI1) | VViolet |
| 25 | AIR TEMPERATURE (ATI2) | GYGrey |
| 26 | MAP | YYellow |
| 27 | TPS | WWhite |
| 28 | +5V | OOrange |
| 29 | IGNITION OUTPUT # 4 | Y/GYellow with green stripe |
| 30 | IGNITION OUTPUT # 3 | Y/OYellow with orange stripe |
| 31 | IGNITION OUTPUT # 2 | Y/RYellow with red stripe |
| 32 | IGNITION OUTPUT # 1 | Y/BYellow with black stripe |
Haltech Platinum Sprint RE pins at a glance
- Which pins are the crank and cam inputs on the Haltech Platinum Sprint RE?
- TRIGGER (+): pin 1 (Yellow, Y). HOME (+): pin 2 (Yellow, Y). TRIGGER (-): pin 17 (Green, G). HOME (-): pin 18 (Green, G).
- Which pins are the injector outputs on the Haltech Platinum Sprint RE?
- INJECTOR # 4: pin 13 (Blue with red stripe, L/R). INJECTOR # 3: pin 14 (Blue with brown stripe, L/BR). INJECTOR # 2: pin 15 (Blue with black stripe, L/B). INJECTOR # 1: pin 16 (Blue, L).
- Which pins are the ignition outputs on the Haltech Platinum Sprint RE?
- IGNITION OUTPUT # 4: pin 29 (Yellow with green stripe, Y/G). IGNITION OUTPUT # 3: pin 30 (Yellow with orange stripe, Y/O). IGNITION OUTPUT # 2: pin 31 (Yellow with red stripe, Y/R). IGNITION OUTPUT # 1: pin 32 (Yellow with black stripe, Y/B).
- Which pins are ground on the Haltech Platinum Sprint RE?
- SIGNAL GROUND: pin 22 (Black with white stripe, B/W). POWER GROUND: pin 23 (Black, B).
- Which pins power the Haltech Platinum Sprint RE?
- +12V SWITCHED: pins 10, 11.
- Which pins are the sensor supplies on the Haltech Platinum Sprint RE?
- +5V: pin 28 (Orange, O).
Haltech Platinum Sprint RE pinout sheet
A printable sheet with the connector drawings and every pin, made from the checked data on this page.
Where this comes from
Only Haltech's own documents. Pin names and notes are written exactly as Haltech writes them.
Haltech quick start guide
Haltech wiring diagram
Haltech wire colour codes
- B = Black
- BR = Brown
- G = Green
- GY = Grey
- L = Blue
- O = Orange
- R = Red
- V = Violet
- Y = Yellow
- W = White
Two letters: the first is the wire colour, the second is the stripe.
How we checked it
- We start from Haltech's pinout table for this ECU.
- We read every pin again from a second Haltech document, the wiring diagram or the quick start guide. A script compares the two, pin by pin.
- A pin is only shown when its function and its wire colour match in both. Where a diagram has no text to read, we read the pins off the drawing itself.
- The notes are Haltech's own words from its pinout table.
Where Haltech's documents disagree
Pin 10: the Platinum Sprint RE wiring diagram draws this pin as several spliced branches: "+12V SWITCHED" [GY/R] in two places, the red +12V cores of the trigger and home cables, and the main feed "+12V SWITCHED ECU SENSOR SUPPLY" [R/W] ("CONNECT TO BATTERY + THROUGH RELAY"). Haltech's ECU Connection Table lists pin 10 as GY/R, the colour of the GY/R branches, so that is what we show.
ECU Recovery is not affiliated with Haltech. Haltech and Elite are trademarks of Haltech. If your harness came with its own diagram, check your wiring against it.
More Haltech pinouts
- Haltech Elite 550 pinout
- Haltech Elite 750 pinout
- Haltech Elite 950 pinout
- Haltech Elite 1000 pinout
- Haltech Elite 1500 pinout
- Haltech Elite 2000 pinout
- Haltech Elite 2500 pinout
- Haltech Elite VMS / VMS T pinout
- Haltech Nexus T1 pinout
- Haltech Nexus T2 pinout
- Haltech Nexus S2 pinout
- Haltech Nexus S3 pinout
- Haltech Nexus R3 pinout
- Haltech Nexus R5 pinout
- Haltech Platinum Sport 1000 pinout
- Haltech Platinum Sport 2000 pinout
- Haltech Platinum Sprint 500 pinout
- All Haltech pinouts →
Have a Haltech map file? Open it in the free Haltech map viewer.
Map locked with a password?
We unlock Haltech, MaxxECU, LinkECU, Vi-PEC, ECUMaster, Emtron and FuelTech maps. You see proof from your own file first and only pay $159.99 if it works.
Unlock a map