Pinout

Haltech Elite 550 pinout

Every pin of the 34-pin connector, with the wire colours of Haltech's harness. Tap a pin to see what it does.

Every pin checked against 2 Haltech documents
34-pin connectorLooking into the connector on the ECU
12345678910111213141516171819202122232425262728293031323334

Pick any pin on the drawing or in the table to see its function, its wire colour and the documents it was checked in.

Haltech Elite 550 34-pin connector pinout

PinFunctionWireHaltech note
1DPO 2V/BR
2AVI 1 (* O2 Sensor)GY/YShielded
3IGN 1Y/B
4IGN 2Y/R
5IGN 3Y/O
6IGN 4Y/G
7Not used-
8Not used-
9+5V DCO
10BATTERY GROUNDB
11SIGNAL GROUNDB/W
12DPI 1GYShielded
13Not used-
14THROTTLE POSITION SENSORW
15AVI 3 (* MAP)Y
16CAN HW
17CAN LL
18DPO 1V/B
19INJ 1L
20INJ 2L/B
21INJ 3L/BR
22INJ 4L/R
23DPO 3V/R
24DPO 5 (* Fuel Pump Relay)B/Y
25DPO 4V/O
26+13.8V ECU / INJECTOR PWRR/L
27Not used-
28Not used-
29AIR TEMPERATUREGY
30COOLANT TEMPERATUREV
31TRIGGER +Y
32HOME +Y
33TRIGGER -G
34HOME -G

Haltech Elite 550 pins at a glance

Which pins are CAN on the Haltech Elite 550?
CAN H: pin 16 (White, W). CAN L: pin 17 (Blue, L).
Which pins are the crank and cam inputs on the Haltech Elite 550?
TRIGGER +: pin 31 (Yellow, Y). HOME +: pin 32 (Yellow, Y). TRIGGER -: pin 33 (Green, G). HOME -: pin 34 (Green, G).
Which pins are the injector outputs on the Haltech Elite 550?
INJ 1: pin 19 (Blue, L). INJ 2: pin 20 (Blue with black stripe, L/B). INJ 3: pin 21 (Blue with brown stripe, L/BR). INJ 4: pin 22 (Blue with red stripe, L/R).
Which pins are the ignition outputs on the Haltech Elite 550?
IGN 1: pin 3 (Yellow with black stripe, Y/B). IGN 2: pin 4 (Yellow with red stripe, Y/R). IGN 3: pin 5 (Yellow with orange stripe, Y/O). IGN 4: pin 6 (Yellow with green stripe, Y/G).
Which pins are ground on the Haltech Elite 550?
BATTERY GROUND: pin 10 (Black, B). SIGNAL GROUND: pin 11 (Black with white stripe, B/W).
Which pins power the Haltech Elite 550?
+13.8V ECU / INJECTOR PWR: pin 26 (Red with blue stripe, R/L).
Which pins are the sensor supplies on the Haltech Elite 550?
+5V DC: pin 9 (Orange, O).

Haltech Elite 550 pinout sheet

A printable sheet with the connector drawings and every pin, made from the checked data on this page.

Haltech Elite 550 pinout diagram with wire colours

Where this comes from

Only Haltech's own documents. Pin names and notes are written exactly as Haltech writes them.

Haltech wire colour codes

  • B = Black
  • BR = Brown
  • G = Green
  • GY = Grey
  • L = Blue
  • O = Orange
  • R = Red
  • V = Violet
  • Y = Yellow
  • W = White

Two letters: the first is the wire colour, the second is the stripe.

How we checked it

  • We start from Haltech's pinout table for this ECU.
  • We read every pin again from a second Haltech document, the wiring diagram or the quick start guide. A script compares the two, pin by pin.
  • A pin is only shown when its function and its wire colour match in both. Where a diagram has no text to read, we read the pins off the drawing itself.
  • The notes are Haltech's own words from its pinout table.

ECU Recovery is not affiliated with Haltech. Haltech and Elite are trademarks of Haltech. If your harness came with its own diagram, check your wiring against it.

Map locked with a password?

We unlock Haltech, MaxxECU, LinkECU, Vi-PEC, ECUMaster, Emtron and FuelTech maps. You see proof from your own file first and only pay $159.99 if it works.

Unlock a map