Which pins are the crank and cam inputs on the Haltech Platinum Sprint 500?

TRIGGER (+): pin 1 (Yellow, Y). HOME (+): pin 2 (Yellow, Y). TRIGGER (-): pin 17 (Green, G). HOME (-): pin 18 (Green, G).

Which pins are the injector outputs on the Haltech Platinum Sprint 500?

INJECTOR # 4: pin 13 (Blue with red stripe, L/R). INJECTOR # 3: pin 14 (Blue with brown stripe, L/BR). INJECTOR # 2: pin 15 (Blue with black stripe, L/B). INJECTOR # 1: pin 16 (Blue, L).

Which pins are the ignition outputs on the Haltech Platinum Sprint 500?

IGNITION OUTPUT # 4: pin 29 (Yellow with green stripe, Y/G). IGNITION OUTPUT # 3: pin 30 (Yellow with orange stripe, Y/O). IGNITION OUTPUT # 2: pin 31 (Yellow with red stripe, Y/R). IGNITION OUTPUT # 1: pin 32 (Yellow with black stripe, Y/B).

Which pins are ground on the Haltech Platinum Sprint 500?

SIGNAL GROUND: pin 22 (Black with white stripe, B/W). POWER GROUND: pin 23 (Black, B).

Pinout

Haltech Platinum Sprint 500 pinout

Every pin of the 32-pin connector, with the wire colours of Haltech's harness. Tap a pin to see what it does.

Every pin checked against 2 Haltech documents

32-pin connectorLooking into the plug, wire side

Pick any pin on the drawing or in the table to see its function, its wire colour and the documents it was checked in.

Haltech Platinum Sprint 500 32-pin connector pinout

Pin	Function	Wire
1	TRIGGER (+)	YYellow
2	HOME (+)	YYellow
3	Not used	-
4	ROADSPEED INPUT (DPI1)	GYGreyShielded
5	Not used	-
6	TACHO OUTPUT (DPO1)	V/BViolet with black stripe
7	THERMOFAN OUTPUT (DPO2)	V/BRViolet with brown stripe
8	GENERAL PURPOSE OUTPUT 1 (DPO3)	V/RViolet with red stripe
9	GENERAL PURPOSE OUTPUT 2 (DPO4)	V/OViolet with orange stripe
10	+12V SWITCHED	GY/RGrey with red stripe
11	+12V SWITCHED	RRed
12	FUEL PUMP RELAY TRIGGER	B/YBlack with yellow stripe
13	INJECTOR # 4	L/RBlue with red stripe
14	INJECTOR # 3	L/BRBlue with brown stripe
15	INJECTOR # 2	L/BBlue with black stripe
16	INJECTOR # 1	LBlue
17	TRIGGER (-)	GGreen
18	HOME (-)	GGreen
19	Not used	-
20	AUX REV LIMITER (AVI1)	O/BOrange with black stripe
21	O2 SENSOR INPUT	GY/OGrey with orange stripeShielded
22	SIGNAL GROUND	B/WBlack with white stripe
23	POWER GROUND	BBlack
24	COOLANT TEMPERATURE (ATI1)	VViolet
25	AIR TEMPERATURE (ATI2)	GYGrey
26	MAP	YYellow
27	TPS	WWhite
28	+5V	OOrange
29	IGNITION OUTPUT # 4	Y/GYellow with green stripe
30	IGNITION OUTPUT # 3	Y/OYellow with orange stripe
31	IGNITION OUTPUT # 2	Y/RYellow with red stripe
32	IGNITION OUTPUT # 1	Y/BYellow with black stripe

Haltech Platinum Sprint 500 pins at a glance

Which pins are the crank and cam inputs on the Haltech Platinum Sprint 500?: TRIGGER (+): pin 1 (Yellow, Y). HOME (+): pin 2 (Yellow, Y). TRIGGER (-): pin 17 (Green, G). HOME (-): pin 18 (Green, G).
Which pins are the injector outputs on the Haltech Platinum Sprint 500?: INJECTOR # 4: pin 13 (Blue with red stripe, L/R). INJECTOR # 3: pin 14 (Blue with brown stripe, L/BR). INJECTOR # 2: pin 15 (Blue with black stripe, L/B). INJECTOR # 1: pin 16 (Blue, L).
Which pins are the ignition outputs on the Haltech Platinum Sprint 500?: IGNITION OUTPUT # 4: pin 29 (Yellow with green stripe, Y/G). IGNITION OUTPUT # 3: pin 30 (Yellow with orange stripe, Y/O). IGNITION OUTPUT # 2: pin 31 (Yellow with red stripe, Y/R). IGNITION OUTPUT # 1: pin 32 (Yellow with black stripe, Y/B).
Which pins are ground on the Haltech Platinum Sprint 500?: SIGNAL GROUND: pin 22 (Black with white stripe, B/W). POWER GROUND: pin 23 (Black, B).
Which pins power the Haltech Platinum Sprint 500?: +12V SWITCHED: pins 10, 11.
Which pins are the sensor supplies on the Haltech Platinum Sprint 500?: +5V: pin 28 (Orange, O).

Haltech Platinum Sprint 500 pinout sheet

A printable sheet with the connector drawings and every pin, made from the checked data on this page.

Download PDF Download diagram (PNG)

Haltech Platinum Sprint 500 pinout diagram with wire colours

Where this comes from

Only Haltech's own documents. Pin names and notes are written exactly as Haltech writes them.

Haltech quick start guide
- Platinum Sprint 500 Quick Start Guide, ECU Connection Table (Haltech)
Haltech wiring diagram
- Platinum Sprint 500 Wiring Diagram (Haltech, rev F, Feb 2010)
- Platinum Sprint 500 Wiring Diagram (Haltech, rev F, Feb 2010) - rows read from the drawing

Haltech wire colour codes

B = Black
BR = Brown
G = Green
GY = Grey
L = Blue
O = Orange
R = Red
V = Violet
Y = Yellow
W = White

Two letters: the first is the wire colour, the second is the stripe.

How we checked it

We start from Haltech's pinout table for this ECU.
We read every pin again from a second Haltech document, the wiring diagram or the quick start guide. A script compares the two, pin by pin.
A pin is only shown when its function and its wire colour match in both. Where a diagram has no text to read, we read the pins off the drawing itself.
The notes are Haltech's own words from its pinout table.

Where Haltech's documents disagree

Pin 10: the Platinum Sprint 500 wiring diagram draws this pin as several spliced branches: "+12V SWITCHED" [GY/R] in two places, the red +12V cores of the trigger and home cables, and the main feed "+12V SWITCHED ECU SENSOR SUPPLY" [R/W] ("CONNECT TO BATTERY + THROUGH RELAY"). Haltech's ECU Connection Table lists pin 10 as GY/R, the colour of the GY/R branches, so that is what we show.

ECU Recovery is not affiliated with Haltech. Haltech and Elite are trademarks of Haltech. If your harness came with its own diagram, check your wiring against it.

More Haltech pinouts

Have a Haltech map file? Open it in the free Haltech map viewer.

Map locked with a password?

We unlock Haltech, MaxxECU, LinkECU, Vi-PEC, ECUMaster, Emtron and FuelTech maps. You see proof from your own file first and only pay $159.99 if it works.

Unlock a map