Link G5 Voodoo Pro pinout
ecurecovery.com/pinouts/link-ecu/g5-voodoo-pro · Every pin from Link's own guide for this ECU, read twice · data checked 2026-11-01
Pinout
Link G5 Voodoo Pro pinout
Every pin of the 34-pin A, 34-pin B, and 26-pin E connectors, with the wire colours of Link's harness. Tap a pin to see what it does.
Every pin from Link's own guide for this ECU, read twicePick any pin on the drawing or in the table to see its function, its wire colour and the documents it was checked in.
Link G5 Voodoo Pro connector A pinout (34-pin)
| Pin | Function | Wire | Link note |
|---|---|---|---|
| A1 | Inj 4 | Brown/Orange | |
| A2 | Inj 3 | Brown/Red | |
| A3 | Inj 2 | Brown | |
| A4 | Inj 1 | Brown/Black | |
| A5 | +14V* | Red | Switched or Constant |
| A6 | Ign Sw# | Red/White | Switched Power |
| A7 | Sensor Gnd / Shield | Green | |
| A8 | Trig 1 | Black | |
| A9 | Trig 2 | Red | |
| A10 | Ign 4 | Blue/Orange | |
| A11 | Ign 3 | Blue/Red | |
| A12 | Ign 2 | Blue/Brown | |
| A13 | Ign 1 | Blue | |
| A14 | An Volt 4 | White/Black | |
| A15 | Temp 1 | Yellow | |
| A16 | Temp 2 | Yellow/Brown | |
| A17 | An Volt 1 | Yellow/Blue | |
| A18 | Aux 4 | Orange | |
| A19 | Aux 3 | Orange/Red | |
| A20 | Aux 2 | Orange/Brown | |
| A21 | Aux 1 | Orange/Black | |
| A22 | An Volt 2 | White/Brown | |
| A23 | DI 3 | Grey/Red | |
| A24 | Sensor Gnd | Green | |
| A25 | Ground | Black | |
| A26 | Aux 8 | Orange/Purple | |
| A27 | Aux 7 | Orange/Blue | |
| A28 | Aux 6 | Orange/Green | |
| A29 | Aux 5 | Orange/Yellow | |
| A30 | DI 1 | Grey/Black | |
| A31 | DI 2 | Grey/Brown | |
| A32 | +5V | Red/Blue | |
| A33 | An Volt 3 | Yellow/Black | |
| A34 | Ground | Black |
Link G5 Voodoo Pro connector B pinout (34-pin)
| Pin | Function | Wire | Link note |
|---|---|---|---|
| B1 | Inj 8 | Brown/Purple | |
| B2 | Inj 7 | Brown/Blue | |
| B3 | Inj 6 | Brown/Green | |
| B4 | Inj 5 | Brown/Yellow | |
| B5 | +14V E-Throttle | Red | |
| B6 | Temp 3 | Yellow/Red | |
| B7 | Temp 4 | Yellow/Orange | |
| B8 | Knock 2 | White | |
| B9 | Knock 1 | White | |
| B10 | Ign 8 | Blue/Purple | |
| B11 | Ign 7 | Blue/Black | |
| B12 | Ign 6 | Blue/Green | |
| B13 | Ign 5 | Blue/Yellow | |
| B14 | An Volt 14 | Blue/White | |
| B15 | AN Volt 6 | White/Red | |
| B16 | AN Volt 7 | White/Orange | |
| B17 | Shield/Gnd | Green | |
| B18 | Aux 9† | Purple | Can be used as an H-bridge |
| B19 | DI 6 | Grey/Green | |
| B20 | DI 5 | Grey/Yellow | |
| B21 | DI 4 | Grey/Orange | |
| B22 | Gnd Out | Green | |
| B23 | An Volt 8 | White/Yellow | |
| B24 | An Volt 9 | White/Green | |
| B25 | Ground | Black | |
| B26 | Aux 10† | Purple/White | Can be used as an H-bridge |
| B27 | DI 10 | Grey/Purple | |
| B28 | DI 9 | Grey/White | |
| B29 | DI 8 | Grey | |
| B30 | DI 7 | Grey/Blue | |
| B31 | An Volt 10 | White/Blue | |
| B32 | An Volt 11 | White | |
| B33 | An Volt 5 | Yellow/Green | |
| B34 | Ground | Black |
Link G5 Voodoo Pro connector E pinout (26-pin)
| Pin | Function | Wire | Link note |
|---|---|---|---|
| E1 | Inj 12 | - | |
| E2 | Inj 11 | - | |
| E3 | Inj 10 | - | |
| E4 | Inj 9 | - | |
| E5 | CAN 2 H | - | |
| E6 | CAN 2 L | - | |
| E7 | Ground | - | |
| E8 | Inj 16 / Ign 12 | - | |
| E9 | Inj 15 / Ign 11 | - | |
| E10 | Inj 14 / Ign 10 | - | |
| E11 | Inj 13 / Ign 9 | - | |
| E12 | An Volt 12 | - | |
| E13 | An Volt 13 | - | |
| E14 | Aux 11‡ | - | Can be used as an H-bridge |
| E15 | Aux 13 / WB1 Heater | - | |
| E16 | WB1 RE | - | |
| E17 | WB1 IPE | - | |
| E18 | WB1 APE | - | |
| E19 | WB1 MES | - | |
| E20 | Aux 12‡ | - | Can be used as an H-bridge |
| E21 | Ground | - | |
| E22 | Aux 14 / WB2 Heater | - | |
| E23 | WB2 RE | - | |
| E24 | WB2 IPE | - | |
| E25 | WB2 APE | - | |
| E26 | WB2 MES | - |
Link G5 Voodoo Pro pins at a glance
- Which pins are CAN on the Link G5 Voodoo Pro?
- CAN 2 H: pin E5. CAN 2 L: pin E6.
- Which pins are the crank and cam inputs on the Link G5 Voodoo Pro?
- Trig 1: pin A8 (Black). Trig 2: pin A9 (Red).
- Which pins are the injector outputs on the Link G5 Voodoo Pro?
- Inj 4: pin A1 (Brown/Orange). Inj 3: pin A2 (Brown/Red). Inj 2: pin A3 (Brown). Inj 1: pin A4 (Brown/Black). Inj 8: pin B1 (Brown/Purple). Inj 7: pin B2 (Brown/Blue). Inj 6: pin B3 (Brown/Green). Inj 5: pin B4 (Brown/Yellow). Inj 12: pin E1. Inj 11: pin E2. Inj 10: pin E3. Inj 9: pin E4. Inj 16 / Ign 12: pin E8. Inj 15 / Ign 11: pin E9. Inj 14 / Ign 10: pin E10. Inj 13 / Ign 9: pin E11.
- Which pins are the ignition outputs on the Link G5 Voodoo Pro?
- Ign 4: pin A10 (Blue/Orange). Ign 3: pin A11 (Blue/Red). Ign 2: pin A12 (Blue/Brown). Ign 1: pin A13 (Blue). Ign 8: pin B10 (Blue/Purple). Ign 7: pin B11 (Blue/Black). Ign 6: pin B12 (Blue/Green). Ign 5: pin B13 (Blue/Yellow). Inj 16 / Ign 12: pin E8. Inj 15 / Ign 11: pin E9. Inj 14 / Ign 10: pin E10. Inj 13 / Ign 9: pin E11.
- Which pins are ground on the Link G5 Voodoo Pro?
- Sensor Gnd: pin A24 (Green). Ground: pins A25, A34, B25, B34, E7, E21. Gnd Out: pin B22 (Green).
- Which pins power the Link G5 Voodoo Pro?
- +14V*: pin A5 (Red). Ign Sw#: pin A6 (Red/White).
- Which pins are the sensor supplies on the Link G5 Voodoo Pro?
- +5V: pin A32 (Red/Blue).
- Which pins are the wideband sensor connections on the Link G5 Voodoo Pro?
- WB1 RE: pin E16. WB1 IPE: pin E17. WB1 APE: pin E18. WB1 MES: pin E19. WB2 RE: pin E23. WB2 IPE: pin E24. WB2 APE: pin E25. WB2 MES: pin E26.
Link G5 Voodoo Pro pinout sheet
A printable sheet with the connector drawings and every pin, made from the checked data on this page.
Where this comes from
Only Link's own documents. Pin names and notes are written exactly as Link writes them.
Link quick start guide for this ECU
Link guide for the G5 Voodoo Neo4, the same pin
Link guide for the G5 Voodoo Neo6, the same pin
Link guide for the G5 Voodoo Pro V2, the same pin
Plug drawing: TE Connectivity customer drawing (used for the drawing only)Third party
How we checked it
- Link publishes one pinout document for each ECU: its quick start guide. Every pin here comes from that guide. Link's full wiring manual is only inside its PCLink software, so it is not used.
- A script reads every pin from the guide. Each pin is then read a second time: from Link's guide for a sister ECU that shows the same pin, from the I/O table in the same guide, or by eye from the same guide.
- A pin is only shown when both readings agree on its function and, where Link gives one, its wire colour. Pin numbers are the ones Link prints in its guides.
- Labels, notes and wire colours are written exactly as Link writes them, for example Brown/Orange.
ECU Recovery is not affiliated with Link. Link and its product names are trademarks of Link. If your harness came with its own diagram, check your wiring against it.
More Link pinouts
- Link G5 Voodoo Neo4 pinout
- Link G5 Voodoo Neo6 pinout
- Link G5 Voodoo Pro V2 pinout
- Link G4X AtomX pinout
- Link G4X MonsoonX pinout
- Link G4X StormX pinout
- Link G4X FuryX pinout
- Link G4X XtremeX pinout
- Link G4+ Atom pinout
- Link G4+ Monsoon pinout
- Link G4+ Storm pinout
- Link G4+ Fury pinout
- Link G4+ Xtreme pinout
- Link G4+ Thunder pinout
- Link G4+ Kurofune pinout
- Link G4+ Force GDI pinout
- All Link pinouts →
Have a Link map file? Open it in the free Link map viewer.
Map locked with a password?
We unlock Haltech, MaxxECU, LinkECU, Vi-PEC, ECUMaster, Emtron and FuelTech maps. You see proof from your own file first and only pay $159.99 if it works.
Unlock a map