Emtron KV16M pinout
ecurecovery.com/pinouts/emtron/kv16m · Every pin checked against 2 Emtron documents · data checked 2026-11-04
Emtron KV16M pinout
Every pin of the 55-pin A, 26-pin B, and 55-pin C connectors, with Emtron's own pin names. Tap a pin to see what it does.
Every pin checked against 2 Emtron documentsPick any pin on the drawing or in the table to see its function and the documents it was checked in.
Emtron KV16M connector A pinout (55-pin)
Mating connector: Deutsch Autosport AS616-35SN (Red), 55 pin
| Pin | Function |
|---|---|
| A1 | Injection Channel 1 |
| A2 | Injection Channel 2 |
| A3 | Injection Channel 3 |
| A4 | Injection Channel 4 |
| A5 | Injection Channel 5 |
| A6 | Injection Channel 6 |
| A7 | Injection Channel 7 |
| A8 | Injection Channel 8 |
| A9 | Injection Channel 9 |
| A10 | Injection Channel 10 |
| A11 | Injection Channel 11 |
| A12 | Injection Channel 12 |
| A13 | Injection Channel 13 |
| A14 | Injection Channel 14 |
| A15 | Injection Channel 15 |
| A16 | Injection Channel 16 |
| A17 | Lambda 1 Nernst Cell (Vs) |
| A18 | Lambda 1 Cal Resistor (CalR) |
| A19 | Lambda 1 Pump Cell (Ip) |
| A20 | Lambda 1 Virtual Ground (VGnd) |
| A21 | Lambda 1 Heater + |
| A22 | Lambda 1 Heater - |
| A23 | Digital Input 13 |
| A24 | Digital Input 14 |
| A25 | Lambda 2 Pump Cell (Ip) |
| A26 | Lambda 2 Virtual Ground (VGnd) |
| A27 | Lambda 2 Nernst Cell (Vs) |
| A28 | Lambda 2 Cal Resistor (CalR) |
| A29 | Lambda 2 Heater + |
| A30 | Lambda 2 Heater - |
| A31 | Digital Input Ground Out |
| A32 | Ignition Channel 1 |
| A33 | Ignition Channel 2 |
| A34 | Ignition Channel 3 |
| A35 | Ignition Channel 4 |
| A36 | Ignition Channel 5 |
| A37 | Ignition Channel 6 |
| A38 | Ignition Channel 7 |
| A39 | Ignition Channel 8 |
| A40 | Ignition Channel 9 |
| A41 | Ignition Channel 10 |
| A42 | Ignition Channel 11 |
| A43 | Ignition Channel 12 |
| A44 | Digital Input 3 |
| A45 | Digital Input 2 |
| A46 | Digital Input 1 |
| A47 | Digital Input 9 |
| A48 | Digital Input 8 |
| A49 | Digital Input 7 |
| A50 | Digital Input 6 |
| A51 | Digital Input 5 |
| A52 | Digital Input 4 |
| A53 | Digital Input 10 |
| A54 | Digital Input 11 |
| A55 | Digital Input 12 |
Emtron KV16M connector B pinout (26-pin)
Mating connector: Deutsch Autosport AS616-26SN (Red), 26 pin
| Pin | Function |
|---|---|
| B_A | ECU 14V Supply |
| B_B | ECU 14V Supply |
| B_C | ECU 14V Supply |
| B_D | ECU Ground |
| B_E | ECU Ground |
| B_F | Auxiliary Output 16 |
| B_G | Auxiliary Output 15 |
| B_H | Auxiliary Output 14 |
| B_J | Auxiliary Output 12 |
| B_K | Auxiliary Output 10 |
| B_L | Auxiliary Output 8 |
| B_M | Auxiliary Output 7 |
| B_N | Auxiliary Output 5 |
| B_P | Auxiliary Output 3 |
| B_R | Auxiliary Output 1 |
| B_S | Auxiliary Output 2 |
| B_T | ECU 14V Supply |
| B_U | ECU Ground |
| B_V | ECU Ground |
| B_W | Auxiliary Output 13 |
| B_X | Auxiliary Output 11 |
| B_Y | Auxiliary Output 9 |
| B_Z | Auxiliary Output 6 |
| B_a | Auxiliary Output 4 |
| B_b | ECU Ground |
| B_c | ECU Ground |
Emtron KV16M connector C pinout (55-pin)
Mating connector: Deutsch Autosport AS616-35SA (Yellow), 55 pin
| Pin | Function |
|---|---|
| C1 | Analog Input Channel 1 |
| C2 | Analog Input Channel 2 |
| C3 | Analog Input Channel 3 |
| C4 | Analog Input Channel 4 |
| C5 | Analog Input Channel 5 |
| C6 | Analog Input Channel 6 |
| C7 | Analog Input Channel 7 |
| C8 | Analog Input Channel 8 |
| C9 | Analog Input Channel 9 |
| C10 | Analog Input Channel 10 |
| C11 | Analog Input Channel 11 |
| C12 | Analog Input Channel 12 |
| C13 | Analog Input Channel 13 |
| C14 | Analog Input Channel 14 |
| C15 | Analog Input Channel 15 |
| C16 | Analog Input Channel 16 |
| C17 | Analog Input Channel 17 |
| C18 | Analog Input Channel 18 |
| C19 | Analog Input Channel 19 |
| C20 | Analog Input Channel 20 |
| C21 | Analog Input Channel 21 |
| C22 | Analog Input Channel 22 |
| C23 | Analog Input Channel 23 |
| C24 | Analog Input Channel 24 |
| C25 | Knock 2 - |
| C26 | SHIELD (Crank/Cam/ Knock) |
| C27 | SHIELD (Crank/Cam/ Knock) |
| C28 | Analog Sensor 0V Reference |
| C29 | Analog Sensor 0V Reference |
| C30 | Analog Sensor 0V Reference |
| C31 | Analog Sensor 0V Reference |
| C32 | Knock 2 + |
| C33 | Analog Out |
| C34 | CAN 2L |
| C35 | CAN 2H |
| C36 | CAN 1L |
| C37 | CAN 1H |
| C38 | Sensor Supply Vref2: 5.0V |
| C39 | Sensor Supply Vref2: 5.0V |
| C40 | Knock 1 - |
| C41 | Sync Sensor - |
| C42 | Sync Sensor + |
| C43 | Crank Index Sensor - |
| C44 | Crank Index Sensor + |
| C45 | Sensor Supply Vref1: 5.0V |
| C46 | Sensor Supply Vref1: 5.0V |
| C47 | Knock 1 + |
| C48 | Ethernet Tx + |
| C49 | Ethernet Tx - |
| C50 | Ethernet Rx + |
| C51 | Ethernet Rx - |
| C52 | Sensor Supply 8V |
| C53 | Constant 14V Supply(Backup) |
| C54 | Sensor Supply Vref3: 5.0V |
| C55 | Sensor Supply Vref3: 5.0V |
Locked Emtron map file? Check it free. You see proof from your own file before you pay anything.
Check my map freeEmtron KV16M pins at a glance
- Which pins are CAN on the Emtron KV16M?
- CAN 2L: pin C34. CAN 2H: pin C35. CAN 1L: pin C36. CAN 1H: pin C37.
- Which pins are the crank and cam inputs on the Emtron KV16M?
- Sync Sensor -: pin C41. Sync Sensor +: pin C42. Crank Index Sensor -: pin C43. Crank Index Sensor +: pin C44.
- Which pins are the injector outputs on the Emtron KV16M?
- Injection Channel 1: pin A1. Injection Channel 2: pin A2. Injection Channel 3: pin A3. Injection Channel 4: pin A4. Injection Channel 5: pin A5. Injection Channel 6: pin A6. Injection Channel 7: pin A7. Injection Channel 8: pin A8. Injection Channel 9: pin A9. Injection Channel 10: pin A10. Injection Channel 11: pin A11. Injection Channel 12: pin A12. Injection Channel 13: pin A13. Injection Channel 14: pin A14. Injection Channel 15: pin A15. Injection Channel 16: pin A16.
- Which pins are the ignition outputs on the Emtron KV16M?
- Ignition Channel 1: pin A32. Ignition Channel 2: pin A33. Ignition Channel 3: pin A34. Ignition Channel 4: pin A35. Ignition Channel 5: pin A36. Ignition Channel 6: pin A37. Ignition Channel 7: pin A38. Ignition Channel 8: pin A39. Ignition Channel 9: pin A40. Ignition Channel 10: pin A41. Ignition Channel 11: pin A42. Ignition Channel 12: pin A43.
- Which pins are ground on the Emtron KV16M?
- ECU Ground: pins B_D, B_E, B_U, B_V, B_b, B_c. Analog Sensor 0V Reference: pins C28, C29, C30, C31.
- Which pins power the Emtron KV16M?
- ECU 14V Supply: pins B_A, B_B, B_C, B_T.
- Which pins are the sensor supplies on the Emtron KV16M?
- Sensor Supply 8V: pin C52.
- Which pins are the wideband sensor connections on the Emtron KV16M?
- Lambda 1 Nernst Cell (Vs): pin A17. Lambda 1 Cal Resistor (CalR): pin A18. Lambda 1 Pump Cell (Ip): pin A19. Lambda 1 Virtual Ground (VGnd): pin A20. Lambda 1 Heater +: pin A21. Lambda 1 Heater -: pin A22. Lambda 2 Pump Cell (Ip): pin A25. Lambda 2 Virtual Ground (VGnd): pin A26. Lambda 2 Nernst Cell (Vs): pin A27. Lambda 2 Cal Resistor (CalR): pin A28. Lambda 2 Heater +: pin A29. Lambda 2 Heater -: pin A30.
Where this comes from
Only Emtron's own documents. Pin names and notes are written exactly as Emtron writes them.
Emtron pinout for this ECU
Pinouts.doc_kv16mpdf
Plug drawing: TE Connectivity Deutsch Autosport catalogue, insert arrangements (used for the drawing only)Third party
How we checked it
- We start from Emtron's pinout page for this ECU, on its Resource Centre.
- Every pin is read again in Emtron's wiring harness specification for the ECU family, which lists each pin with its name, description and wire colour. A script compares them pin by pin.
- A pin is only shown when both name the same function. A pin the ECU's pinout marks NC is shown as not connected; where the family's harness specification lists something there, the page says so. A wire colour is shown only when a second Emtron harness specification gives the same colour for that pin name.
- Labels are Emtron's own words from the pinout page; notes are its words from the harness specification.
ECU Recovery is not affiliated with Emtron. Emtron and its product names are trademarks of Emtron. If your harness came with its own diagram, check your wiring against it.
Map locked with a password?
We unlock Haltech, MaxxECU, LinkECU, Vi-PEC, ECUMaster, Emtron and FuelTech maps. You see proof from your own file first and only pay $159.99 if it works.
Unlock a map