ECUMaster EMU PRO 16 腳位圖
ecurecovery.com/pinouts/ecumaster/emu-pro-16 · 每個腳位都來自 ECUMaster 這款 ECU 的官方腳位表，讀取兩次 · 數據核對於 2026-11-01
腳位圖
ECUMaster EMU PRO 16 腳位圖
34 針 A、26 針 B、34 針 C及26 針 D 插頭的每一個腳位，使用 ECUMaster 自己的腳位名稱。輕按腳位即可查看它的功能。
每個腳位都來自 ECUMaster 這款 ECU 的官方腳位表，讀取兩次在圖上或表格中選擇任何腳位，即可查看它的功能及核對時所用的文件。
ECUMaster EMU PRO 16 插頭 A 腳位（34 針）
對應插頭：TE AMP Superseal 1.0 4-1437290-1
| 腳位 | 功能 | ECUMaster 備註 |
|---|---|---|
| A1 | Ignition 8 | Output for active or passive ignition coils. |
| A2 | Injector 1 | Output for high or low impedance injectors. |
| A3 | Injector 2 | Output for high or low impedance injectors. |
| A4 | Injector 3 | Output for high or low impedance injectors. |
| A5 | Injector 4 | Output for high or low impedance injectors. |
| A6 | Injector 5 | Output for high or low impedance injectors. |
| A7 | Injector 6 | Output for high or low impedance injectors. |
| A8 | Injector 7 | Output for high or low impedance injectors. |
| A9 | Injector 8 | Output for high or low impedance injectors. |
| A10 | Ignition 7 | Output for active or passive ignition coils. |
| A11 | Power GND | Power ground. |
| A12 | +5V source A | +5V sensor supply, source A. |
| A13 | Digital 2 | Digital signal input. |
| A14 | Digital 4 | Digital signal input. |
| A15 | Digital 8 | Digital signal input. |
| A16 | Digital 6 (turbo) | Digital signal input, can be used for turboshaft speed sensor. |
| A17 | Power GND | Power ground. |
| A18 | Ignition 6 | Output for active or passive ignition coils. |
| A19 | Power GND | Power ground. |
| A20 | Digital GND | Digital ground. |
| A21 | Digital 1 (crank) | Digital signal input, dedicated crankshaft sensor input. |
| A22 | Digital 3 | Digital signal input. |
| A23 | Digital 7 | Digital signal input. |
| A24 | Digital 5 (turbo) | Digital signal input, can be used for turboshaft speed sensor. |
| A25 | Auxiliary 9 | Output for auxiliary devices. |
| A26 | Ignition 5 | Output for active or passive ignition coils. |
| A27 | Ignition 4 | Output for active or passive ignition coils. |
| A28 | Ignition 3 | Output for active or passive ignition coils. |
| A29 | Ignition 2 | Output for active or passive ignition coils. |
| A30 | Ignition 1 | Output for active or passive ignition coils. |
| A31 | CAN 1 high (PC comm) | CAN bus, fixed 1Mbps, used for communication with PC and peripheral devices. |
| A32 | CAN 1 low (PC comm) | CAN bus, fixed 1Mbps, used for communication with PC and peripheral devices. |
| A33 | CAN 2 high | CAN bus, configurable speed, used for communication with peripheral devices. |
| A34 | CAN 2 low | CAN bus, configurable speed, used for communication with peripheral devices. |
ECUMaster EMU PRO 16 插頭 B 腳位（26 針）
對應插頭：TE AMP Superseal 1.0 1473416-1
| 腳位 | 功能 | ECUMaster 備註 |
|---|---|---|
| B1 | Auxiliary 1 (WBO heater) | Output for auxiliary devices, can be used as a WBO heater. |
| B2 | Auxiliary 2 (WBO heater) | Output for auxiliary devices, can be used as a WBO heater. |
| B3 | Auxiliary 3 (WBO heater) | Output for auxiliary devices, can be used as a WBO heater. |
| B4 | Auxiliary 4 (WBO heater) | Output for auxiliary devices, can be used as a WBO heater. |
| B5 | Auxiliary 5 | Output for auxiliary devices. |
| B6 | Auxiliary 6 | Output for auxiliary devices. |
| B7 | Auxiliary 7 | Output for auxiliary devices. |
| B8 | +12V supply | Power supply for the ECU and H-bridges. |
| B9 | Digital GND (flash drive) | Digital ground, recommended for flash drive connection. |
| B10 | USB D- (flash drive) | USB data pin for a flash drive, data logging. |
| B11 | USB D+ (flash drive) | USB data pin for a flash drive, data logging. |
| B12 | +5V source A (flash drive) | +5V sensor supply, source A, recommended for flash drive connection. |
| B13 | Auxiliary 8 | Output for auxiliary devices. |
| B14 | +12V supply | Power supply for the ECU and H-bridges. |
| B15 | +12V switched | +12V input to switch the ECU on or off. |
| B16 | Knock sensor 1 | Knock sensor input. |
| B17 | Knock sensor 2 | Knock sensor input. |
| B18 | WBO 2 VGND (LSU 4.9) | Wideband oxygen sensor input, LSU 4.9 Pin 2 (IPN / VM). |
| B19 | Power GND | Power ground. |
| B20 | WBO 1 IP (LSU 4.9) | Wideband oxygen sensor input, LSU 4.9 Pin 1 (APE / IP). |
| B21 | WBO 1 VS (LSU 4.9) | Wideband oxygen sensor input, LSU 4.9 Pin 6 (UN / RE). |
| B22 | WBO 1 RCAL (LSU 4.9) | Wideband oxygen sensor input, LSU 4.9 Pin 5 (RT / IA). |
| B23 | WBO 1 VGND (LSU 4.9) | Wideband oxygen sensor input, LSU 4.9 Pin 2 (IPN / VM). |
| B24 | WBO 2 IP (LSU 4.9) | Wideband oxygen sensor input, LSU 4.9 Pin 1 (APE / IP). |
| B25 | WBO 2 VS (LSU 4.9) | Wideband oxygen sensor input, LSU 4.9 Pin 6 (UN / RE). |
| B26 | WBO 2 RCAL (LSU 4.9) | Wideband oxygen sensor input, LSU 4.9 Pin 5 (RT / IA). |
ECUMaster EMU PRO 16 插頭 C 腳位（34 針）
對應插頭：TE AMP Superseal 1.0 4-1437290-0
| 腳位 | 功能 | ECUMaster 備註 |
|---|---|---|
| C1 | Auxiliary 10 | Output for auxiliary devices. |
| C2 | Auxiliary 11 | Output for auxiliary devices. |
| C3 | Auxiliary 12 | Output for auxiliary devices. |
| C4 | Analog 7 | Analog signal input. |
| C5 | Analog 10 (2k2 pull) | Analog signal input. |
| C6 | H-bridge 1A | H-bridge output. |
| C7 | H-bridge 2B | H-bridge output. |
| C8 | H-bridge 3A | H-bridge output. |
| C9 | H-bridge 2A | H-bridge output. |
| C10 | Analog 1 (MAP) | Analog signal input, dedicated MAP sensor input. |
| C11 | Analog 3 | Analog signal input. |
| C12 | Analog 5 | Analog signal input. |
| C13 | Analog 8 | Analog signal input. |
| C14 | Analog 11 (2k2 pull) | Analog signal input. |
| C15 | Analog 13 (1k pull) | Analog signal input. |
| C16 | Analog 15 (330R pull) | Analog signal input. |
| C17 | H-bridge 3B | H-bridge output. |
| C18 | Analog 2 | Analog signal input. |
| C19 | Analog 4 | Analog signal input. |
| C20 | Analog 6 | Analog signal input. |
| C21 | Analog 9 (2k2 pull) | Analog signal input. |
| C22 | Analog 12 (2k2 pull) | Analog signal input. |
| C23 | Analog 14 (1k pull) | Analog signal input. |
| C24 | Analog 16 (100R pull) | Analog signal input. |
| C25 | H-bridge 1B | H-bridge output. |
| C26 | LIN | LIN network. |
| C27 | +5V source B | +5V sensor supply, source B. |
| C28 | +5V source B | +5V sensor supply, source B. |
| C29 | Analog GND | Analog ground. |
| C30 | Power GND | Power ground. |
| C31 | Precision analog 1 | High precision analog input. |
| C32 | Precision analog 2 | High precision analog input. |
| C33 | Precision analog 3 | High precision analog input. |
| C34 | Precision analog 4 | High precision analog input. |
ECUMaster EMU PRO 16 插頭 D 腳位（26 針）
對應插頭：TE AMP Superseal 1.0 3-1437290-7
| 腳位 | 功能 | ECUMaster 備註 |
|---|---|---|
| D1 | Injector 10 | Output for high or low impedance injectors. |
| D2 | Injector 11 | Output for high or low impedance injectors. |
| D3 | Injector 12 | Output for high or low impedance injectors. |
| D4 | Injector 13 | Output for high or low impedance injectors. |
| D5 | Injector 14 | Output for high or low impedance injectors. |
| D6 | Injector 15 | Output for high or low impedance injectors. |
| D7 | Injector 16 | Output for high or low impedance injectors. |
| D8 | Injector 9 | Output for high or low impedance injectors. |
| D9 | Analog 17 | Analog signal input. |
| D10 | Analog 18 | Analog signal input. |
| D11 | Digital 9 / Analog 19 | Digital signal input or Analog signal input. |
| D12 | Digital 10 / Analog 20 | Digital signal input or Analog signal input. |
| D13 | Auxiliary 13 | Output for auxiliary devices. |
| D14 | H-bridge 4A | H-bridge output. |
| D15 | Precision analog 6 | High precision analog input. |
| D16 | Precision analog 8 | High precision analog input. |
| D17 | Analog GND | Analog ground. |
| D18 | Power GND | Power ground. |
| D19 | Auxiliary 14 | Output for auxiliary devices. |
| D20 | H-bridge 4B | H-bridge output. |
| D21 | Precision analog 5 | High precision analog input. |
| D22 | Precision analog 7 | High precision analog input. |
| D23 | Ignition 9 | Output for active or passive ignition coils. |
| D24 | Ignition 10 | Output for active or passive ignition coils. |
| D25 | Auxiliary 16 | Output for auxiliary devices. |
| D26 | Auxiliary 15 | Output for auxiliary devices. |
ECUMaster 的 Map 檔被鎖？ 免費檢查。付款前你會先看到從你自己檔案得出的驗證結果。
免費檢查我的 MapECUMaster EMU PRO 16 腳位速查
- ECUMaster EMU PRO 16 的 CAN 是哪幾個腳位？
- CAN 1 high (PC comm): 腳位 A31. CAN 1 low (PC comm): 腳位 A32. CAN 2 high: 腳位 A33. CAN 2 low: 腳位 A34.
- ECUMaster EMU PRO 16 的噴油嘴輸出是哪幾個腳位？
- Injector 1: 腳位 A2. Injector 2: 腳位 A3. Injector 3: 腳位 A4. Injector 4: 腳位 A5. Injector 5: 腳位 A6. Injector 6: 腳位 A7. Injector 7: 腳位 A8. Injector 8: 腳位 A9. Injector 10: 腳位 D1. Injector 11: 腳位 D2. Injector 12: 腳位 D3. Injector 13: 腳位 D4. Injector 14: 腳位 D5. Injector 15: 腳位 D6. Injector 16: 腳位 D7. Injector 9: 腳位 D8.
- ECUMaster EMU PRO 16 的點火輸出是哪幾個腳位？
- Ignition 8: 腳位 A1. Ignition 7: 腳位 A10. Ignition 6: 腳位 A18. Ignition 5: 腳位 A26. Ignition 4: 腳位 A27. Ignition 3: 腳位 A28. Ignition 2: 腳位 A29. Ignition 1: 腳位 A30. Ignition 9: 腳位 D23. Ignition 10: 腳位 D24.
- ECUMaster EMU PRO 16 的接地是哪幾個腳位？
- Power GND: 腳位 A11, A17, A19, B19, C30, D18. Digital GND: 腳位 A20. Digital GND (flash drive): 腳位 B9. Analog GND: 腳位 C29, D17.
- ECUMaster EMU PRO 16 的供電是哪幾個腳位？
- +12V supply: 腳位 B8, B14. +12V switched: 腳位 B15.
- ECUMaster EMU PRO 16 的感應器供電是哪幾個腳位？
- +5V source A: 腳位 A12. +5V source A (flash drive): 腳位 B12. +5V source B: 腳位 C27, C28.
- ECUMaster EMU PRO 16 的寬頻含氧感應器接線是哪幾個腳位？
- WBO 2 VGND (LSU 4.9): 腳位 B18. WBO 1 IP (LSU 4.9): 腳位 B20. WBO 1 VS (LSU 4.9): 腳位 B21. WBO 1 RCAL (LSU 4.9): 腳位 B22. WBO 1 VGND (LSU 4.9): 腳位 B23. WBO 2 IP (LSU 4.9): 腳位 B24. WBO 2 VS (LSU 4.9): 腳位 B25. WBO 2 RCAL (LSU 4.9): 腳位 B26.
資料來源
只使用 ECUMaster 自己的文件。腳位名稱及備註完全按照 ECUMaster 的原文書寫。
ECUMaster 這款 ECU 的腳位表
ECUMaster EMU PRO 8 的指南，同一腳位
插頭圖：TE Connectivity 客戶圖紙（只用於繪圖）第三方
核對方法
- 我們由 ECUMaster 這款 ECU 的腳位文件開始。
- 再在第二份 ECUMaster 文件中把每個腳位重新讀一次：簡版腳位表、用戶手冊，或（對同系列 ECU 上相同的腳位）該款 ECU 的腳位表。如沒有第二份文件列出某個腳位，我們會從同一份腳位表以人手再讀一次。
- 只有兩次讀取給出相同功能的腳位才會顯示。ECUMaster 的文件沒有標示線色，因此不顯示線色。
- 備註是 ECUMaster 腳位表中的原文描述。
ECU Recovery 與 ECUMaster 並無關連。ECUMaster 及其產品名稱是 ECUMaster 的商標。如你的線束附有自己的接線圖，請以它為準核對接線。
Map 被密碼鎖住？
我們可以解鎖 Haltech、MaxxECU、LinkECU、Vi-PEC、ECUMaster、Emtron 及 FuelTech 的 Map。你會先看到從你自己檔案得出的驗證結果，確認有效才需支付 US$159.99。
解鎖 Map