MoTeC M150 针脚定义
ecurecovery.com/pinouts/motec/m150 · 每个针脚均已与 3 份 MoTeC 资料核对 · 数据核对于 2026-11-01
针脚定义
MoTeC M150 针脚定义
34 针 A、26 针 B、34 针 C和26 针 D 插头的每一个针脚，使用 MoTeC 自己的针脚名称。点击针脚即可查看它的功能。
每个针脚均已与 3 份 MoTeC 资料核对在图上或表格中选择任一针脚，即可查看它的功能以及核对时所用的资料。
MoTeC M150 插头 A 针脚定义（34 针）
配套插头：Tyco Superseal 34 Position Keying 2 – MoTeC #65067
| 针脚 | 功能 | MoTeC 说明 |
|---|---|---|
| A01 | Analogue Temperature Input 5 (AT5) | 1k Pull up to SEN_5V_C |
| A02 | Analogue Temperature Input 6 (AT6) | 1k Pull up to SEN_5V_C |
| A03 | Analogue Voltage Input 15 (AV15) | |
| A04 | Analogue Voltage Input 16 (AV16) | |
| A05 | Analogue Voltage Input 17 (AV17) | |
| A06 | Low Side Ignition 9 (IGN_LS9) | |
| A07 | Low Side Ignition 10 (IGN_LS10) | |
| A08 | Low Side Ignition 11 (IGN_LS11) | |
| A09 | Low Side Ignition 12 (IGN_LS12) | |
| A10 | Sensor 5.0V C (SEN_5V0_C1) | |
| A11 | Lambda Narrow Input 1 (LA_NB1) | |
| A12 | Lambda Narrow Input 2 (LA_NB2) | |
| A13 | Knock Input 3 (KNOCK3) | |
| A14 | Knock Input 4 (KNOCK4) | |
| A15 | Digital Input 2 (DIG2) | |
| A16 | Digital Input 3 (DIG3) | |
| A17 | Digital Input 4 (DIG4) | |
| A18 | Sensor 5.0V C (SEN_5V0_C2) | |
| A19 | Sensor 5.0V B (SEN_5V0_B2) | |
| A20 | LIN Bus (LIN) | |
| A21 | RS232 Receive (RS232_RX) | |
| A22 | RS232 Transmit (RS232_TX) | |
| A23 | Digital Input 1 (DIG1) | |
| A24 | Battery Negative (BAT_NEG3) | |
| A25 | Battery Negative (BAT_NEG4) | |
| A26 | Sensor 0V C (SEN_0V_C1) | |
| A27 | Sensor 0V C (SEN_0V_C2) | |
| A28 | CAN Bus 3 High (CAN3_HI) | |
| A29 | CAN Bus 3 Low (CAN3_LO) | |
| A30 | CAN Bus 2 High (CAN2_HI) | |
| A31 | CAN Bus 2 Low (CAN2_LO) | |
| A32 | Battery Negative (BAT_NEG5) | |
| A33 | Sensor 0V B (SEN_0V_B1) | |
| A34 | Sensor 0V A (SEN_0V_A1) |
MoTeC M150 插头 B 针脚定义（26 针）
配套插头：Tyco Superseal 26 Position Keying 3 – MoTeC #65068
| 针脚 | 功能 | MoTeC 说明 |
|---|---|---|
| B01 | Half Bridge Output 9 (OUT_HB9) | |
| B02 | Half Bridge Output 10 (OUT_HB10) | |
| B03 | Universal Digital Input 8 (UDIG8) | |
| B04 | Universal Digital Input 9 (UDIG9) | |
| B05 | Universal Digital Input 10 (UDIG10) | |
| B06 | Universal Digital Input 11 (UDIG11) | |
| B07 | Universal Digital Input 12 (UDIG12) | |
| B08 | Low Side Injector 5 (INJ_LS5) | |
| B09 | Low Side Injector 3 (INJ_LS3) | |
| B10 | Analogue Voltage Input 9 (AV9) | |
| B11 | Analogue Voltage Input 10 (AV10) | |
| B12 | Analogue Voltage Input 11 (AV11) | |
| B13 | Battery Positive (BAT_POS) | |
| B14 | Low Side Injector 6 (INJ_LS6) | |
| B15 | Low Side Injector 4 (INJ_LS4) | |
| B16 | Analogue Voltage Input 12 (AV12) | |
| B17 | Analogue Voltage Input 13 (AV13) | |
| B18 | Analogue Voltage Input 14 (AV14) | |
| B19 | Battery Positive (BAT_POS) | |
| B20 | Half Bridge Output 7 (OUT_HB7) | |
| B21 | Half Bridge Output 8 (OUT_HB8) | |
| B22 | Peak Hold Injector 9 (INJ_PH9) | |
| B23 | Peak Hold Injector 10 (INJ_PH10) | |
| B24 | Peak Hold Injector 11 (INJ_PH11) | |
| B25 | Peak Hold Injector 12 (INJ_PH12) | |
| B26 | Sensor 5.0V A (SEN_5V0_A) |
MoTeC M150 插头 C 针脚定义（34 针）
配套插头：Tyco Superseal 34 Position Keying 1 – MoTeC #65044
| 针脚 | 功能 | MoTeC 说明 |
|---|---|---|
| C01 | Half Bridge Output 2 (OUT_HB2) | |
| C02 | Sensor 5.0V A (SEN_5V0_A) | |
| C03 | Low Side Ignition 1 (IGN_LS1) | |
| C04 | Low Side Ignition 2 (IGN_LS2) | |
| C05 | Low Side Ignition 3 (IGN_LS3) | |
| C06 | Low Side Ignition 4 (IGN_LS4) | |
| C07 | Low Side Ignition 5 (IGN_LS5) | |
| C08 | Low Side Ignition 6 (IGN_LS6) | |
| C09 | Sensor 5.0V B (SEN_5V0_B) | |
| C10 | Battery Negative (BAT_NEG1) | |
| C11 | Battery Negative (BAT_NEG2) | |
| C12 | Low Side Ignition 7 (IGN_LS7) | |
| C13 | Low Side Ignition 8 (IGN_LS8) | |
| C14 | Analogue Voltage Input 1 (AV1) | |
| C15 | Analogue Voltage Input 2 (AV2) | |
| C16 | Analogue Voltage Input 3 (AV3) | |
| C17 | Analogue Voltage Input 4 (AV4) | |
| C18 | Half Bridge Output 1 (OUT_HB1) | |
| C19 | Peak Hold Injector 1 (INJ_PH1) | |
| C20 | Peak Hold Injector 2 (INJ_PH2) | |
| C21 | Peak Hold Injector 3 (INJ_PH3) | |
| C22 | Peak Hold Injector 4 (INJ_PH4) | |
| C23 | Low Side Injector 1 (INJ_LS1) | |
| C24 | Low Side Injector 2 (INJ_LS2) | |
| C25 | Analogue Voltage Input 5 (AV5) | |
| C26 | Battery Positive (BAT_POS) | |
| C27 | Peak Hold Injector 5 (INJ_PH5) | |
| C28 | Peak Hold Injector 6 (INJ_PH6) | |
| C29 | Peak Hold Injector 7 (INJ_PH7) | |
| C30 | Peak Hold Injector 8 (INJ_PH8) | |
| C31 | Half Bridge Output 3 (OUT_HB3) | |
| C32 | Half Bridge Output 4 (OUT_HB4) | |
| C33 | Half Bridge Output 5 (OUT_HB5) | |
| C34 | Half Bridge Output 6 (OUT_HB6) |
MoTeC M150 插头 D 针脚定义（26 针）
配套插头：Tyco Superseal 26 Position Keying 1 – MoTeC #65045
| 针脚 | 功能 | MoTeC 说明 |
|---|---|---|
| D01 | Universal Digital Input 1 (UDIG1) | |
| D02 | Universal Digital Input 2 (UDIG2) | |
| D03 | Analogue Temperature Input 1 (AT1) | 1k Pull up to SEN_5V_A |
| D04 | Analogue Temperature Input 2 (AT2) | 1k Pull up to SEN_5V_A |
| D05 | Analogue Temperature Input 3 (AT3) | 1k Pull up to SEN_5V_B |
| D06 | Analogue Temperature Input 4 (AT4) | 1k Pull up to SEN_5V_B |
| D07 | Knock Input 1 (KNOCK1) | |
| D08 | Universal Digital Input 3 (UDIG3) | |
| D09 | Universal Digital Input 4 (UDIG4) | |
| D10 | Universal Digital Input 5 (UDIG5) | |
| D11 | Universal Digital Input 6 (UDIG6) | |
| D12 | Battery Backup (BAT_BAK) | |
| D13 | Knock Input 2 (KNOCK2) | |
| D14 | Universal Digital Input 7 (UDIG7) | |
| D15 | Sensor 0V A (SEN_0V_A) | |
| D16 | Sensor 0V B (SEN_0V_B) | |
| D17 | CAN Bus 1 High (CAN1_HI) | |
| D18 | CAN Bus 1 Low (CAN1_LO) | |
| D19 | Sensor 6.3V (SEN_6V3) | |
| D20 | Analogue Voltage Input 6 (AV6) | |
| D21 | Analogue Voltage Input 7 (AV7) | |
| D22 | Analogue Voltage Input 8 (AV8) | |
| D23 | Ethernet Transmit+ (ETH_TX+) | Ethernet |
| D24 | Ethernet Transmit- (ETH_TX-) | Ethernet Green |
| D25 | Ethernet Receive+ (ETH_RX+) | Ethernet |
| D26 | Ethernet Receive- (ETH_RX-) | Ethernet |
MoTeC M150 针脚速查
- MoTeC M150 的 CAN 是哪几个针脚？
- CAN Bus 3 High (CAN3_HI): 针脚 A28. CAN Bus 3 Low (CAN3_LO): 针脚 A29. CAN Bus 2 High (CAN2_HI): 针脚 A30. CAN Bus 2 Low (CAN2_LO): 针脚 A31. CAN Bus 1 High (CAN1_HI): 针脚 D17. CAN Bus 1 Low (CAN1_LO): 针脚 D18.
- MoTeC M150 的喷油嘴输出是哪几个针脚？
- Low Side Injector 5 (INJ_LS5): 针脚 B08. Low Side Injector 3 (INJ_LS3): 针脚 B09. Low Side Injector 6 (INJ_LS6): 针脚 B14. Low Side Injector 4 (INJ_LS4): 针脚 B15. Peak Hold Injector 9 (INJ_PH9): 针脚 B22. Peak Hold Injector 10 (INJ_PH10): 针脚 B23. Peak Hold Injector 11 (INJ_PH11): 针脚 B24. Peak Hold Injector 12 (INJ_PH12): 针脚 B25. Peak Hold Injector 1 (INJ_PH1): 针脚 C19. Peak Hold Injector 2 (INJ_PH2): 针脚 C20. Peak Hold Injector 3 (INJ_PH3): 针脚 C21. Peak Hold Injector 4 (INJ_PH4): 针脚 C22. Low Side Injector 1 (INJ_LS1): 针脚 C23. Low Side Injector 2 (INJ_LS2): 针脚 C24. Peak Hold Injector 5 (INJ_PH5): 针脚 C27. Peak Hold Injector 6 (INJ_PH6): 针脚 C28. Peak Hold Injector 7 (INJ_PH7): 针脚 C29. Peak Hold Injector 8 (INJ_PH8): 针脚 C30.
- MoTeC M150 的点火输出是哪几个针脚？
- Low Side Ignition 9 (IGN_LS9): 针脚 A06. Low Side Ignition 10 (IGN_LS10): 针脚 A07. Low Side Ignition 11 (IGN_LS11): 针脚 A08. Low Side Ignition 12 (IGN_LS12): 针脚 A09. Low Side Ignition 1 (IGN_LS1): 针脚 C03. Low Side Ignition 2 (IGN_LS2): 针脚 C04. Low Side Ignition 3 (IGN_LS3): 针脚 C05. Low Side Ignition 4 (IGN_LS4): 针脚 C06. Low Side Ignition 5 (IGN_LS5): 针脚 C07. Low Side Ignition 6 (IGN_LS6): 针脚 C08. Low Side Ignition 7 (IGN_LS7): 针脚 C12. Low Side Ignition 8 (IGN_LS8): 针脚 C13.
- MoTeC M150 的搭铁是哪几个针脚？
- Battery Negative (BAT_NEG3): 针脚 A24. Battery Negative (BAT_NEG4): 针脚 A25. Sensor 0V C (SEN_0V_C1): 针脚 A26. Sensor 0V C (SEN_0V_C2): 针脚 A27. Battery Negative (BAT_NEG5): 针脚 A32. Sensor 0V B (SEN_0V_B1): 针脚 A33. Sensor 0V A (SEN_0V_A1): 针脚 A34. Battery Negative (BAT_NEG1): 针脚 C10. Battery Negative (BAT_NEG2): 针脚 C11. Sensor 0V A (SEN_0V_A): 针脚 D15. Sensor 0V B (SEN_0V_B): 针脚 D16.
- MoTeC M150 的供电是哪几个针脚？
- Battery Positive (BAT_POS): 针脚 B13, B19, C26.
- MoTeC M150 的传感器供电是哪几个针脚？
- Sensor 5.0V C (SEN_5V0_C1): 针脚 A10. Sensor 5.0V C (SEN_5V0_C2): 针脚 A18. Sensor 5.0V B (SEN_5V0_B2): 针脚 A19. Sensor 5.0V A (SEN_5V0_A): 针脚 B26, C02. Sensor 5.0V B (SEN_5V0_B): 针脚 C09.
资料来源
只使用 MoTeC 自己的资料。针脚名称和说明完全按照 MoTeC 的原文书写。
MoTeC 数据手册
MoTeC 产品页面（针脚定义表）
MoTeC 硬件手册
插头图：TE Connectivity 客户图纸（仅用于绘图）第三方
核对方法
- 我们从 MoTeC 这款 ECU 的数据手册入手。
- 再在 MoTeC 这款 ECU 的产品页面上，以及（如涵盖此 ECU）其硬件手册中，把每个针脚重新读一遍，由脚本逐针比对。
- 只有针脚名称和完整名称在每份资料中都一致，才会显示该针脚。MoTeC 没有规定标准线色，因此不显示线色。
- 说明文字是 MoTeC 的原话，只有当两份资料印法一致时才显示。
ECU Recovery 与 MoTeC 无关联。MoTeC 及其产品名称是 MoTeC 的商标。如果你的线束附带了自己的接线图，请以它为准核对接线。
Map 被密码锁住了？
我们可以解锁 Haltech、MaxxECU、LinkECU、Vi-PEC、ECUMaster、Emtron 和 FuelTech 的 Map。你会先看到来自你自己文件的验证结果，确认有效才需支付 US$159.99。
解锁 Map